{"title":"Fiberglass Fenders","description":"\u003cp\u003e\u003cspan\u003eIntroducing for the first time in the industry, a fender that matches up with both the Peterbilt front fender and the Kenworth front fender was a goal of ours. On one side of the fender, we have a feature lip that is designed to match the feature lip on your Peterbilt front fender. If you spin the fender around, it can also be mounted with the smooth side out to match the smooth side of the Kenworth front fender. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur true one-piece full fenders allow our customers to exhibit a clean and sleek look while on the road. We upgraded our full-fenders from our past two-piece design to one full fiberglass unit. The full fenders fit both a 52 and 54 axle spread. Shift fenders are now 36.5” from the ground to the top of the center of the fender. This is one of the deepest dropped fenders on the market.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"single-axle-fiberglass-fender","title":"Single Axle Fiberglass Fender","description":"\u003cp\u003e\u003cstrong\u003eOur Fiberglass Single Axle Fenders\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe take pride and are confident that our fenders are built stronger than anything else on the market.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eHow do we know? We test our fenders on working trucks that demand more. We didn’t just want to build another fiberglass fender—we wanted to build one that could handle the demands of the road. After putting standard fiberglass fenders through extensive real-world testing, including impact, heat, pulling, freezing, and repeated abuse, we took what we learned and applied it to our own design. When we developed our fenders, we did lab testing of the fiberglass layup and completed all of the same tests on our own fiberglass. From there, we added a foam and smashed ball bearings through them in the lab to determine exactly how much strength they had per square inch for impact resistance.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFinally, we did real world testing and ran them on some of the worst highways in North America, jarring farm yards and other routes through rough conditions. We pulled heavy loads and light loads. We drove slow and we drove fast. We noted it all and built fenders that could withstand the daily requirements of the trucks.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Mounting\/Bracket System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eShift Products signature hidden bracket system utilizes 316 stainless steel internal brackets. These are bonded inside each fender and mated to 3\/8” and ½” steel brackets that attach to the frame of the truck. These brackets slot together making installation easy. Saving your truck downtime while installing and less money spent on shop time, as it increases throughput of builds and lowers SRT’s. \u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSimplicity doesn’t mean weak. We use 3\/8” and ½” steel brackets. We put the strength where we need it without adding additional weight where we don’t. Shift’s brackets have been tested for millions of miles with our test fleets and even more miles on the road with our customers. It is a proven system that is designed to last for the long haul.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNo weld bracket system.\u003c\/strong\u003e The Shift signature hidden bracket system requires some drilling, but no welding. It requires basic shop tools and no fabrication experience. We think of the installer as well as the end user.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Lining System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAfter 13 years of producing the same great fender, we have disrupted the game with the first encapsulated liner out of closed cell foam. This liner is built directly into the fender and reduces the impact from stones and debris that come off the tires. The foam liner absorbs the impact and doesn’t transfer through to the painted surface, acting like a built in shock absorber for your paint and reduces stars on the exterior of the paint.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe foam lining process took years to develop and refine. We worked with experts and labs throughout North America to find the right ratio of foam to fiberglass. Why did we bother with all this? To create a fender that is stronger and looks better for the long haul.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeterbilt Feature Lip \u0026amp; Kenworth Feature Lip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFor the first time in the industry, we took the time to design a fender that matches up with both a Peterbilt front fender and a Kenworth front fender. On one side of the fender, we have a feature lip that is designed to match the factory lip on your Peterbilt front fender. If you spin the fender around, it can also be mounted with the smooth side out to match the smooth side of the factory Kenworth front fender.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAs always, these side profiles can be ordered in 3 different depths to let you achieve the look you are wanting. Starting with a low profile fender with a 1” lip and building up to a 2” lip or 3” lip to close that gap on your tires.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIf there is an issue on the road, no one wants to take the fenders apart in order to fix their tire. Shift Products 1” lip fenders are designed to allow the tires to be removed without having to remove the fender.\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from durable woven fiberglass\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e36\" top-to-bottom height\u003c\/li\u003e\n\u003cli\u003eReversible design to complement both Peterbilt and Kenworth front fender profiles\u003c\/li\u003e\n\u003cli\u003eAvailable with 1\", 2\", or 3\" lip depths to achieve your preferred tire-to-fender gap\u003c\/li\u003e\n\u003cli\u003e1\" lip option allows tire removal without removing the fender\u003c\/li\u003e\n\u003cli\u003eDeep-drop design for a clean, low-profile appearance\u003c\/li\u003e\n\u003cli\u003eApproximately 48 lbs. per fender\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstallation Instructions: \u003c\/strong\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003ca style=\"color: #ff0000;\" href=\"https:\/\/drive.google.com\/file\/d\/1kw1RmoIlu-Xdgsu_j2zL1624Plhj7dOY\/view?usp=sharing\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Shift Products","offers":[{"title":"1\"","offer_id":50141904142575,"sku":"172406","price":1050.0,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":50141904175343,"sku":"172407","price":1050.0,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":50141904208111,"sku":"172408","price":1050.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/6816\/1263\/files\/172406new.jpg?v=1783368904"},{"product_id":"fiberglass-full-fender","title":"Fiberglass Full Fender","description":"\u003cp\u003e\u003cstrong\u003eOur Fiberglass Full Fender\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe take pride and are confident that our fenders are built stronger than anything else on the market.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eHow do we know? We test our fenders on working trucks that demand more. We didn’t just want to build another fiberglass fender—we wanted to build one that could handle the demands of the road. After putting standard fiberglass fenders through extensive real-world testing, including impact, heat, pulling, freezing, and repeated abuse, we took what we learned and applied it to our own design. When we developed our fenders, we did lab testing of the fiberglass layup and completed all of the same tests on our own fiberglass. From there, we added a foam and smashed ball bearings through them in the lab to determine exactly how much strength they had per square inch for impact resistance.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFinally, we did real world testing and ran them on some of the worst highways in North America, jarring farm yards and other routes through rough conditions. We pulled heavy loads and light loads. We drove slow and we drove fast. We noted it all and built fenders that could withstand the daily requirements of the trucks.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-flange.jpg?t=1686144890\" alt=\"\" width=\"438\" height=\"299\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Mounting\/Bracket System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eShift Products signature hidden bracket system utilizes 316 stainless steel internal brackets. These are bonded inside each fender and mated to 3\/8” and ½” steel brackets that attach to the frame of the truck. These brackets slot together making installation easy. Saving your truck downtime while installing and less money spent on shop time, as it increases throughput of builds and lowers SRT’s. \u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eSimplicity doesn’t mean weak. We use 3\/8” and ½” steel brackets. We put the strength where we need it without adding additional weight where we don’t. Shift’s brackets have been tested for millions of miles with our test fleets and even more miles on the road with our customers. It is a proven system that is designed to last for the long haul.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNo weld bracket system.\u003c\/strong\u003e The Shift signature hidden bracket system requires some drilling, but no welding. It requires basic shop tools and no fabrication experience. We think of the installer as well as the end user.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-assy-fender-full-1-int-ctr-36.jpg?t=1686145062\" alt=\"\" width=\"445\" height=\"304\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Lining System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAfter 13 years of producing the same great fender, we have disrupted the game with the first encapsulated liner out of closed cell foam. This liner is built directly into the fender and reduces the impact from stones and debris that come off the tires. The foam liner absorbs the impact and doesn’t transfer through to the painted surface, acting like a built in shock absorber for your paint and reduces stars on the exterior of the paint.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe foam lining process took years to develop and refine. We worked with experts and labs throughout North America to find the right ratio of foam to fiberglass. Why did we bother with all this? To create a fender that is stronger and looks better for the long haul.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-pb-side.jpg?t=1686144923\" alt=\"\" width=\"261\" height=\"178\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-kw-side.jpg?t=1686144963\" alt=\"\" width=\"262\" height=\"178\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeterbilt Feature Lip \u0026amp; Kenworth Feature Lip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFor the first time in the industry, we took the time to design a fender that matches up with both a Peterbilt front fender and a Kenworth front fender. On one side of the fender, we have a feature lip that is designed to match the factory lip on your Peterbilt front fender. If you spin the fender around, it can also be mounted with the smooth side out to match the smooth side of the factory Kenworth front fender.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAs always, these side profiles can be ordered in 3 different depths to let you achieve the look you are wanting. Starting with a low profile fender with a 1” lip and building up to a 2” lip or 3” lip to close that gap on your tires.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIf there is an issue on the road, no one wants to take the fenders apart in order to fix their tire. Shift Products 1” lip fenders are designed to allow the tires to be removed without having to remove the fender.\u003c\/p\u003e","brand":"Shift Products","offers":[{"title":"1\"","offer_id":50498844393711,"sku":"172400","price":1779.5,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":50498844426479,"sku":"172401","price":1779.5,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":50498844459247,"sku":"172402","price":1779.5,"currency_code":"CAD","in_stock":true},{"title":"1\" to 3\" Center Lip","offer_id":50498844492015,"sku":"173984","price":1779.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/6816\/1263\/files\/172400FULLFENDER1IN.jpg?v=1784217846"},{"product_id":"fiberglass-half-fender","title":"Fiberglass Half Fender","description":"\u003cp\u003e\u003cstrong\u003eOur Fiberglass Half Fender\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe take pride and are confident that our fenders are built stronger than any other fender on the market.\u003c\/p\u003e\n\u003cp\u003eHow do we know? We test our fenders on working trucks that demand more. We didn’t just want to build another fiberglass fender—we wanted to build one that could handle the demands of the road. After putting standard fiberglass fenders through extensive real-world testing, including impact, heat, pulling, freezing, and repeated abuse, we took what we learned and applied it to our own design. When we developed our fenders, we did lab testing of the fiberglass layup and completed all of the same tests on our own fiberglass. From there, we added a foam and smashed ball bearings through them in the lab to determine exactly how much strength they had per square inch for impact resistance.\u003c\/p\u003e\n\u003cp\u003eFinally, we did real world testing and ran them on some of the worst highways in North America, jarring farm yards and other routes through rough conditions. We pulled heavy loads and light loads. We drove slow and we drove fast. We noted it all and built fenders that could withstand the daily requirements of the trucks.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-flange.jpg?t=1686144890\" alt=\"\" width=\"438\" height=\"299\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Mounting\/Bracket System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShift Products signature hidden bracket system utilizes 316 stainless steel internal brackets. These are bonded inside each fender and mated to 3\/8” and ½” steel brackets that attach to the frame of the truck. These brackets slot together making installation easy. Saving your truck downtime while installing and less money spent on shop time, as it increases throughput of builds and lowers SRT’s. \u003c\/p\u003e\n\u003cp\u003eSimplicity doesn’t mean weak. We use 3\/8” and ½” steel brackets. We put the strength where we need it without adding additional weight where we don’t. Shift’s brackets have been tested for millions of miles with our test fleets and even more miles on the road with our customers. It is a proven system that is designed to last for the long haul.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo weld bracket system.\u003c\/strong\u003e The Shift signature hidden bracket system requires some drilling, but no welding. It requires basic shop tools and no fabrication experience. We think of the installer as well as the end user.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Lining System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter 13 years of producing the same great fender, we have disrupted the game with the first encapsulated liner out of closed cell foam. This liner is built directly into the fender and reduces the impact from stones and debris that come off the tires. The foam liner absorbs the impact and doesn’t transfer through to the painted surface, acting like a built in shock absorber for your paint and reduces stars on the exterior of the paint.\u003c\/p\u003e\n\u003cp\u003eThe foam lining process took years to develop and refine. We worked with experts and labs throughout North America to find the right ratio of foam to fiberglass. Why did we bother with all this? To create a fender that is stronger and looks better for the long haul.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-pb-side.jpg?t=1686144923\" alt=\"\" width=\"261\" height=\"178\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-z340lqmbu1\/images\/stencil\/original\/image-manager\/172400-kw-side.jpg?t=1686144963\" alt=\"\" width=\"262\" height=\"178\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePeterbilt Feature Lip \u0026amp; Kenworth Feature Lip\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the first time in the industry, we took the time to design a fender that matches up with both a Peterbilt front fender and a Kenworth front fender. On one side of the fender, we have a feature lip that is designed to match the factory lip on your Peterbilt front fender. If you spin the fender around, it can also be mounted with the smooth side out to match the smooth side of the factory Kenworth front fender.\u003c\/p\u003e\n\u003cp\u003eAs always, these side profiles can be ordered in 3 different depths to let you achieve the look you are wanting. Starting with a low profile fender with a 1” lip and building up to a 2” lip or 3” lip to close that gap on your tires.\u003c\/p\u003e\n\u003cp\u003eIf there is an issue on the road, no one wants to take the fenders apart in order to fix their tire. Shift Products 1” lip fenders are designed to allow the tires to be removed without having to remove the fender.\u003c\/p\u003e","brand":"Shift Products","offers":[{"title":"1\"","offer_id":50498761982191,"sku":"172661","price":975.0,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":50498762014959,"sku":"172662","price":975.0,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":50498762047727,"sku":"172663","price":975.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/6816\/1263\/files\/FIBERGLASSHALFFENDER1.jpg?v=1781023643"}],"url":"https:\/\/shiftproducts.com\/collections\/fenders.oembed","provider":"Shift Products","version":"1.0","type":"link"}